View Full Version : looking for excel spreedsheet to copy for changing fuel injectors
jeff keyuk
February 22nd, 2011, 01:27 PM
can any one point me to getting a copy of excel spreedsheet for changing fuel injectors!
The same one Greg Banish uses from calibrated success.Thanks!
gmperformancecentre
February 22nd, 2011, 05:44 PM
don't know if this helps
jeff keyuk
February 23rd, 2011, 12:55 PM
Looking for a spreedsheet to change, 1-Flow Rate vs KPA 2-Offset vs Volts vs Vac (B3701)? 3-Change Pulse Adder Table or small pulse adjust and 4- Min Injectors puls Pulse. Does this make sence!!!!
5.7ute
February 23rd, 2011, 02:09 PM
For what injectors??
jeff keyuk
February 23rd, 2011, 02:16 PM
I haven't pick them up yet,but looking to get around 36 or 37Lb injectors.
joecar
February 23rd, 2011, 02:25 PM
can any one point me to getting a copy of excel spreedsheet for changing fuel injectors!
The same one Greg Banish uses from calibrated success.Thanks!Disclaimer/Warning: The same one from Greg Banish's DVD is copyrighted by him.
joecar
February 23rd, 2011, 02:30 PM
can any one point me to getting a copy of excel spreedsheet for changing fuel injectors!
The same one Greg Banish uses from calibrated success.Thanks!
Disclaimer/Warning: The same one from Greg Banish's DVD is copyrighted by him.
Meaning: you will have to obtain those from a valid source other than EFILive.
Sorry mate, we have to protect the forum in regards to copyright law.
jeff keyuk
February 23rd, 2011, 02:34 PM
I purchased Greg's DvD. back in the summer, I am looking to get the spreadsheet he is using on it ,the one he give you on the second DVD is not the same,I like the one he is using in on the DVD. If no one has it here, I am going to e-mail him my self and ask him. Iam not into taking other peoples work.
minytrker
February 23rd, 2011, 02:35 PM
You are probably not going to find someone who is going to give you a copy of the spreadsheet that they had to buy themselves. I have seen the DVD with the spread sheet for sale used alot on ls1tech for cheaper than new if you really want the spreed sheet. There is alot of injector data out there already for many injectors, IMO the spread sheet isnt that big a deal.
jeff keyuk
February 23rd, 2011, 02:49 PM
Thanks Minytrker, I will do that, I didn't think it was a big deal, I did pay for the Calibrated success DVD! Just trying to make it easyer for my self.
joecar
February 23rd, 2011, 03:27 PM
Cool :cheers:
mr.prick
February 23rd, 2011, 10:43 PM
I haven't pick them up yet,but looking to get around 36 or 37Lb injectors.
I've posted a script for the Bosch 0280155868/FAST 303600 36lb injectors.
:)
jeff keyuk
February 24th, 2011, 07:33 AM
Thanks guy's for the help! No means of any pro,but trying hard. I am just finishing changing with heads,cam.fast intake,ect,. I going to do the tune myself ,I think I will be ok! Once I have the car running right, my plan is go and take a base course from greg and so on.
joecar
February 24th, 2011, 08:12 AM
Make sure there are no leaks from your FAST.
jeff keyuk
February 24th, 2011, 09:22 AM
Thanks joe! Are you talking about at the runners ,or some were else???? Iam using all new gaskets.
joecar
February 24th, 2011, 09:39 AM
Yes, the gaskets.
jeff keyuk
February 24th, 2011, 10:42 AM
Thanks again joe, I will make sure to check for any leaks.
jeff keyuk
February 24th, 2011, 01:28 PM
Found what I was looking for ,feel like a goof. It was in front of my eyes.
joecar
February 24th, 2011, 02:03 PM
Stuff happens :doh2:
Whipped383
March 16th, 2012, 02:17 AM
I've posted a script for the Bosch 0280155868/FAST 303600 36lb injectors.
:)
Can you repost that?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.