PDA

View Full Version : E40 rev limit in neutral



4wheelin
February 24th, 2011, 06:35 PM
Am I going blind, I can't find a rev limit in neutral in this tune, the car is converted(engine conversio into 4wd Nissan Patrol) I want to lower the rev limit and lowered all the rpm by gear but with no effect. The ECU dosen't know what gear the trans is in as it a manual.

ScarabEpic22
February 25th, 2011, 03:32 PM
I think the ECM defaults to Park without a trans signal but I could be wrong. Do you have any wiring going into the ECM related to the trans?

How do the factory VZs take care of the gear input?

4wheelin
February 25th, 2011, 08:44 PM
Yeah that's what I've found with the E38's but I can't see the rev limit in Park or Neutral

4wheelin
March 6th, 2011, 08:37 AM
The log says it is in gear 6. Still dosen't help much as I lowered all gears with no success

GMPX
March 15th, 2011, 10:23 AM
Andrew should have sent the updated .calz file to you by now, please let us know if this fixes your problem.

Tordne
March 15th, 2011, 11:34 AM
Yeah it would have been emailed by the EFILive Helpdesk yesterday afternoon local time. If you don;t have it shoot me an email (support@efilive.com) and I'll resend.