N20 Monitor VE Muiltipler A0015

[minytrker]

I have used this before for very small corrections in a/f when on nitrous and it works great. I want to try to run a dry directport setup and use this table to add the fuel with the injectors like a lot of people do with BS3 or Fast XFI computers. Will it be able to do the following

1. add enough fuel for a 300 shot
2. will it add fuel fast enough
3. will it be consistent

Those are my 3 biggest concerns. I would love for it work and be able to keep pushing the envelope with EFI Live and a stock PCM.

[5.7ute]

I know that Brad from Enhanced Automotive has run over a 300hp dry shot before using COS5.(VYSSLS1 on here) However he did say that he had Paul or Ross upgrade the COS5 VE table multiplier limit to do this. Whether this limit has been raised in all COS5 variations only they could tell you.
As for adding fuel fast enough that is up to your fuel system. The pcm commands the increase instantly so you will have no issues there. The sudden drop in fuel pressure at the rail may be your main obstacle.
Up to a 150 dry shot I have found the fuelling consistant over multiple passes.
Edit. The limit might have been just a user defined one so the updates since then may have raised it.