PDA

View Full Version : V1 requesting SES codes on a 2007 LBZ "response $23" and "routine not complete"



Josh2002cc
March 6th, 2011, 06:37 AM
Hello all,

I am trying to read the codes from my 07 LBZ with my V1 however it shows searching the available modules on the bottom of the screen but when it comes time to show any codes it tells me "response $23" "Routine not complete".

This is my first time trying to use my V1 on the 2007 as I just bought it. I know there are codes as the SES light is on. I did select the correct ECM as well on the initial connect screen.

Anyone ever run across this?

Tordne
March 6th, 2011, 12:30 PM
The FlashScan V1 hardware does not support the LBZ (or other newer CAN based vehicles). To support the LBZ you will need to upgrade to the FlashScan V2 product.

Blacky
March 6th, 2011, 01:10 PM
The FlashScan V2 hardware does not support the LBZ (or other newer CAN based vehicles). To support the LBZ you will need to upgrade to the FlashScan V2 product.

I think you mean the FlashScan V1 hardware... :)
Paul

Tordne
March 6th, 2011, 01:12 PM
LOL. Damn 1 & 2 keys being side by side :)