PDA

View Full Version : How to do FAST Learn with EFI Live 07 Allison 6sp.



O_Poole
March 19th, 2011, 01:35 AM
Just finished a Trans-go Allison Jr shift kit.. On a 2007 Duramax would like to do the fast learn was told i can do it with EFI live. I just got a the flashscan V2 to use as a scan tool and have it hooked to the truck don't see how yet?

Thanks!

THEFERMANATOR
March 19th, 2011, 04:19 AM
Fast learn is only done with a TECH 2, you can go in with EFILIVE and reset the TAPS though which will put the trans into fast adapt mode. This is not the fast learn procedure that most people think of though that learns teh clutch volumes while sitting still.

O_Poole
March 19th, 2011, 05:41 AM
Thanks.. Do you know how to do this with EFI live?

I keep getting error can't find allison trans?

ZigBlazer
September 5th, 2011, 02:09 PM
Is there any update with this. I just got my Flashscan V2 and would like to do a relearn. I'm guessing you still can't do the FastLearn like the tech 2, but what can I do to help get my shifts back in line.

My shifts were perfect before reflashing my stock ECM with a DSP5 tune, now they are slow.

bballer182
September 12th, 2011, 10:39 AM
connect the scan tool software to the Allison controller and open the DVT tab and it is right there