PDA

View Full Version : not reading wideband



southern
April 1st, 2011, 02:57 AM
So I went to check out my tune and I have no wideband readings. The wideband is good as it is putting out the 0-5v it should. I am running a plx wideband and have been for the last two years with no problem till now. I checked all the connections and nothing will show up. Thought it might be the sensor till I checked the output. So any help would be great.

joecar
April 1st, 2011, 04:48 AM
At the orange connector that plugs into V1, do you see voltage with a DMM/voltmeter...?

southern
April 1st, 2011, 05:45 AM
yes the connector has power. I have tried it with the obd cable plugged in and with just the box hooked up. nothing either way