Spark timing

[chevydan]

Hello all. I have 1 quick question. I am running a 3bar cos3 on my rr I need to know what tables to adjust so i have absolutely no timing when i go into boost. I am a noob to tuning so dont hurt me to bad.

[joecar]

Hi CD, welcome to the forum :cheers:

A0010 = boost timing table

A0010 description says:
"Once the MAP is above the maximum value allowed in {B0101} "Main VE Table", the PCM will subtract this amount of timing from the final spark advance."

So whatever timing results from B5913/B5914 (and modifier tables), A0010 then subtracts timing from that.

[chevydan]

Ok so in the tables b5913 it is in rpm and grams per cyl. And for the boost timing A0010 table is in map kpa. So my question is how do i know how much to put in the A0010 tables looking at the B5913 tables ?

[johnv]

Look at the last columb in B5913 (1.20 grams/cylinder)

The values you put in the Boost timing table will be subtracted from there.

so if you are in a cell with 24* timing and you put a value of 10 in the boost timing table across the board you will only see 14* when in boost.

[chevydan]

Thank you much.