PDA

View Full Version : How to disable T/C


bstuder11
April 20th, 2011, 11:18 AM
Anyone out there know how to disable T/C on a H2 besides pulling the ABS fuse???
joecar
April 20th, 2011, 11:39 AM
Moved to: Forum -> Tuning -> Petrol/Gas -> Gen III V8 Specific
ScarabEpic22
April 20th, 2011, 11:48 AM
Looking at one of the other tunes you posted earlier, Id set B6614 to the max value (640ft lbs). It is currently at -640ft lbs. Maybe set B6607/B6608 to 0 seconds too.

Take a look at B6612, I wonder if this has anything to do with your old issue...
bstuder11
April 20th, 2011, 11:50 AM
Yeah I'll have to look into that. I didnt make any adjustments to that.
bstuder11
April 20th, 2011, 11:51 AM
Hey when referring to my "old issue" did u mean that idling problem?
ScarabEpic22
April 20th, 2011, 11:55 AM
Hey when referring to my "old issue" did u mean that idling problem?

Yea, it was the high idle after driving right? That table is maxxed, might not make sense if its holding the throttle blade open when you arent on the gas.
bstuder11
April 20th, 2011, 11:59 AM
O, I figured out the idle problem and posted it. That was the throttle cracker. I disabled that and then after knowing that's what was doing it I re enabled it with better parameters and it idles down PERFECTLY now