PDA

View Full Version : Auto VE using BBL



Whipped383
May 4th, 2011, 02:08 PM
I was looking through some of the pid lists on v8 so I could do the logging for auto ve and couldnt find all the pids I needed. Is there a tutorial on using the v2 to bbl to do an auto ve? Thanks

Taz
May 4th, 2011, 02:22 PM
I use the BBR & BBF options regularly, but prefer to conduct "pass through" logging using a Notebook computer. My understanding is that the V2 can't directly display / integrate CALC PIDs into it's own log file (BBL), but that the BBL file can be configured via "V7 compatibility options" to link (and display) predetermined CALC PIDs when the BBL file is opened in the V7 Scan Tool.

Not sure if the absence of CALC PIDs was part of your issue ....


Regards,
Taz

Whipped383
May 4th, 2011, 02:30 PM
Yeah I think that was an the maf freq I couldnt find either. My laptob battery sucks so I was hoping to do it this way. Im way new to this I had my friend help me with it and hes never used v8 or the v2 and I wasnt much help cause I wasnt sure what all he was looking for

ScarabEpic22
May 4th, 2011, 02:35 PM
Shouldnt be an issue, Ive setup a Calc.VE PID set on an AutoCal no problem. Just make sure you add the proper PIDs to the V7 icon in the BBX Scan window so when you open the log file in V7.5 they are already selected. V2/ACs cant display CALC PIDs, that is a scan tool side only.

Taz
May 4th, 2011, 02:40 PM
You can BBL the MAF frequency - V8 PID is "MAFFREQ" - found under the "PCM" module heading.

It seems possible to configure the V2 to log data for the AutoVE process - I have never done it - seems you would need to link all requisite CALC PIDs in V8, prior to programming the PIDs into the V2. The subsequently logged data would then have to be opened in the V7 Scan Tool - to incorporate any CALC PIDs.


Regards,
Taz

Whipped383
May 4th, 2011, 03:17 PM
What about loading custom pids into it?

Taz
May 4th, 2011, 03:20 PM
If by "custom" PID you mean a "CALC" (calculated) PID - then the answer is no. Must be linked to V7.


Regards,
Taz

Whipped383
May 4th, 2011, 03:44 PM
Crap well ok I have some CALC for the E10 fuel we have here so looks like I have to use the laptop.

swingtan
May 4th, 2011, 04:44 PM
My understanding is that the V2 can't directly display / integrate CALC PIDs into it's own log file (BBL), but that the BBL file can be configured via "V7 compatibility options" to link (and display) predetermined CALC PIDs when the BBL file is opened in the V7 Scan Tool.

Correct. The V2 will not calculate any data at all. It's simply a recorder for the data coming from the engine management system.

However, you can set up the V2 to automatically include the "place holders" for calculated PIDs ( like the BEN data) in the V2 PID selection lists. This means they are available in the log file when viewing in ScanTool without the need to select them from the PID list. You can also set a default dashboard in the PID list so it is selected when the log is opened.

Simon

macca33
May 4th, 2011, 09:26 PM
I only worked this one out last week and have done RAFIG and SDautoVE with good results - SDautoVE logs are much longer, which is much better than being restricted by crappy laptop battery life!

cheers

kostelacd69
June 17th, 2011, 08:33 PM
Ok, as some of you know I am in Iraq. I have nothing better to do than read. Is there anywhere that has a step by step on how to use the BBL? I have my laptop but nothing else, so I cant plug it in and play with it. Just wanted to read up on it as much as I can so I can get home and use it without being lost. I have no clue how it works! Thanks guys!

kostelacd69
June 18th, 2011, 12:13 AM
Sorry, looks as if I have already asked this. Sorry thought that U had asked it on LS1.

WeathermanShawn
June 18th, 2011, 02:16 AM
By the way, thanks for your service..:cheers:.

Sounds like the main writing of a BBL User Guide is still a ways off..

I like Joecar's posts..sure you read it, but here it is again..

http://forum.efilive.com/images/misc/quote_icon.png Originally Posted by joecar http://forum.efilive.com/images/buttons/viewpost-right.png (http://forum.efilive.com/showthread.php?p=128787#post128787)
showthread.php?14351-BBL-PIDs-V2 (http://forum.efilive.com/showthread.php?14351-BBL-PIDs-V2&p=128782&viewfull=1#post128782)
showthread.php?13841-What-is-BBL (http://forum.efilive.com/showthread.php?13841-What-is-BBL)
showthread.php?13836-New-V2-help-find-exlporer (http://forum.efilive.com/showthread.php?13836-New-V2-help-find-exlporer&p=123595&viewfull=1#post123595)
showthread.php?15492-V2-BBL-saving-log-data (http://forum.efilive.com/showthread.php?15492-V2-BBL-saving-log-data&p=136965#post136965)

kostelacd69
June 18th, 2011, 08:16 AM
Thanks!

joecar
June 18th, 2011, 10:10 AM
Yes, thanks to all the military personnel :cheers:

In the links posted by Shawn look at the picture-grams, they show how to setup pids on V2 for BBL and how to specify your PCM for BBF.

If you have access to a PC you can install the V8 software to play with.