PDA

View Full Version : how to


ppacpaully
May 9th, 2011, 12:32 PM
how do i get my efi live to pull cal. file out of a E37 if it is not on the list of pcm's, do i have to buy the stream just to get that one. it dont show in the pcm option list i normally pay each time i do one.
Taz
May 9th, 2011, 12:49 PM
What year, make, and model of vehicle is it ? Have you checked the supported vehicles list at efilive.com to ascertain if that specific vehicle is actually supported ?

If the vehicle is not supported, there is no way to read the tune with EFILive.


Regards,
Taz
ppacpaully
May 9th, 2011, 12:59 PM
Yes it is 07 chevy cobalt with 2.2 and says it is a E37 but i done see it as a option for efi 7.5 in the pcm list, but i see it the list for the new efi live that is scan and flash in the same tool but can not edit with out stream.
L31Sleeper
May 9th, 2011, 01:19 PM
You have to use V8 instead of 7.5
Tordne
May 9th, 2011, 01:20 PM
You must have a very old version of the software. Please download an upgrade to the latest V7.5 and V8 software, and also upgrade your FlashScan V2 firmware.

Here are a couple of knowledgebase articles:
- Software
(http://support.efilive.com/kb_article.php?ref=5404-IJZV-0820)- Firmware (http://support.efilive.com/kb_article.php?ref=7243-SFGL-2949)
Taz
May 9th, 2011, 01:23 PM
Just checked also ... that vehicle is supported. In V7.5 "E37 V6, L4 ECM" is a valid controller in the Tune Tool and the Scan Tool.


Regards,
Taz
Tordne
May 9th, 2011, 01:35 PM
You have to use V8 instead of 7.5

It the E39 and E78 that are V8 only. E37 can be read/flashed with both V7.5 and V8.
L31Sleeper
May 9th, 2011, 02:27 PM
You have to use V8 instead of 7.5It the E39 and E78 that are V8 only. E37 can be read/flashed with both V7.5 and V8.

Oops