VY v6 EFILive noob

[vyseriesII]

Hi,

I recently purchased a diagnostic cable and have been trying to get your software to connect. I have followed the help section but im still recieving com port timed out etc.
I made sure com ports are the same, (com port 3)

I'm sure i have loaded the correct vehicle software

Can anyone please help me get started that would be greatly appreciated

Car:
Vy v6 Series 2

http://img857.imageshack.us/img857/5460/efilivev4.th.jpg (http://img857.imageshack.us/i/efilivev4.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

[Blacky]

Are you using a USB->Serial converter?
If you are using a converter chances are it won't work due to most USB-serial converters not supporting the required baud rate of 8192.

Regards
Paul

[vyseriesII]

Are you using a USB->Serial converter?
If you are using a converter chances are it won't work due to most USB-serial converters not supporting the required baud rate of 8192.

Regards
Paul

using this
http://www.ebay.com.au/itm/USB-ALDL-VR-VS-VT-VX-VY-not-LS1-Diagnostic-cable-ECM-/160592184373?pt=AU_Car_Parts_Accessories&hash=item25640a4435.
Its supposed to work

Tried with both max232echo ticked and unticked
This is with serial I/0 on

http://i53.tinypic.com/316u6j5.jpg