PDA

View Full Version : Definition File For 95 Buick Riviera


sirtomtom
May 30th, 2011, 08:10 AM
I have a 1995 Buick Riviera 3.8L Supercharged (Vin "1"). An older post makes reference to a repository of definitions, here (http://forum.efilive.com/showthread.php?5701-Get-a-FREE-copy-of-EFILive-V4-Professional&p=50792&viewfull=1#post50792), that is no longer up.

It is my understanding that with the definition file, I will be able to read the first 8 DTC codes with the evaluation version of the software. Is that the first 8 codes in the onboard computer or first 8 codes listed in the definition file?
Tordne
May 30th, 2011, 11:32 AM
I have just sent you a file via email.
Racing2Fast
September 8th, 2011, 02:51 PM
I have just sent you a file via email.
Hi there Andrew. Is it okay if you send that file to my cousin? here is the email address: normanbaker73@gmail.com
I just wanna help him out with his buick parts (http://www.partstrain.com/ShopByVehicle/BUICK). Luckily i found some answers in here with a few clicks. Thanks in advance
Tordne
September 8th, 2011, 09:40 PM
Email sent
DTC collector
January 22nd, 2012, 11:05 AM
I would also like this file please. I am trying to scan my 1995 Riviera Vin 1.
Thanks
Tordne
January 22nd, 2012, 11:21 AM
Email sent just now.
NVSTEVE
July 24th, 2012, 08:19 AM
could I also get that file please?

thanks
Steve
Tordne
July 26th, 2012, 07:34 AM
Email sent.
NVSTEVE
July 27th, 2012, 08:09 AM
Thank you Andrew.

I am using the downloaded evaluation copy of EFILiveV4 and the vehicl definition file you sent me. I guess my car's PCM is communicating with EFILive but is there a way to tell for sure? I do have a green indicator which makes me think I have a connection established, is that right?

I am completely stupid on this stuff. I don't know what chatter is, whether or not my car chatters, etc.

When I select the "transmit fixed data stream" macro and then with the key turned on, click the green button on the tool bar to start ALDL I see the macro starting and then I get some messages about timeouts expected headers not received, then the macro ends.

Again I'm not sure at this point if my PCM is sending data or not?
sniperdude
October 15th, 2012, 05:56 AM
I have just sent you a file via email.

Could I also get this file?

Thanks!
Tordne
October 22nd, 2012, 05:39 PM
Email sent