PDA

View Full Version : cam upgrade..98 s10



98super10
June 2nd, 2011, 07:30 AM
Im installing a bigger cam in my 2.2 and the company regrinding my cam says ill need my ecm tuned for the cam. A friend of mine has v2 which supports my truck but he hasnt tuned a gas veichle just durmax's so my question what should i change or does someone have a tune i can just download....thanks.

slows10
June 2nd, 2011, 07:55 AM
What are the cam specs? You may not have to change much depending on the specs.What other mods are done? There arent alot of tables to adjust for that pcm. So hopefully you get a pretty mild grind. check the Afr when you get it going. You might have to adjust the ve table some. Have you read out the tune yet?

98super10
June 2nd, 2011, 08:07 AM
Dont know the specs on the cam yet. Hes suppose to send tgem with tge cam when i get it.

98super10
June 13th, 2011, 01:33 PM
Got the new cam installed, heres the specs

Valve lift
Intake .435
Exhaust .420

Cam lift
Intake .290
Exhaust .280

Lobe seperation 110
Rocker ratio 1.5

98super10
June 13th, 2011, 01:34 PM
Got the new cam installed, heres the specs

Valve lift
Intake .435
Exhaust .420

Cam lift
Intake .290
Exhaust .280

Lobe seperation 110
Rocker ratio 1.5