Problems with laptop to v2

[AllOutPerformance]

After i did the latest 7.5 update a few months back i sometimes run into issues with the laptop and v2 not comunicating.I will try and open the program and it just locks up.Most times i just reload the update and it works fine.well now it wont work at all.Ive tried updating drivers and changing cables,also tried my other v2 and still the same problem.Anyone has any input that would be great.

[joecar]

Nate,

is V7 at build 164...?

did you also update V8 software build 155 and V2 firmware 2.07.11...?

[AllOutPerformance]

yes 164 build,not sure on the firmware on v2 and now i cant read it so no sure.I havent updated the v8 stuff at all.

[joecar]

Install V8 build 155, then run V8 EFILive Explorer, goto the firmware tab, browse to firmware 2.07.11 and program into V2.

[AllOutPerformance]

no i dont joe.I know in the past updating the boot block and firm ware in the wrong order would lock the v2.CAn you give me a ring joe and walk me threw it?

[AllOutPerformance]

im on 2.06 02 wants to goto 2.07.02

[AllOutPerformance]

559/999/2265 or land line 559 445 1233 thanks again joe

[AllOutPerformance]

im on flash scan boot block 2.06 02 and firmware 2.06 024
CAn i just follow the on screen updates without any wierd problems or is there a order that has to be done special

[ScarabEpic22]

Thats OLD firmware, you really need to upgrade to 2.07.01 (or is it 2.07.02 now) bootblock and the latest firmware 2.07.11.

AllOut, easiest way is to download the latest updates from the main EFILive.com Downloads page. For this version, I recommend you save your Options.txt file from My Documents\EFILive\V8\Config and then uninstall the old EFILive V8 software. Then install both the latest V7.5 and V8 that you downloaded previously. Copy the Options.txt file back to the location above. Now open V8 Scan & Tune, you will see a little FS V2 icon appear in the taskbar near the Windows clock. Click it, then click F6: Firmware. If you havent plugged your V2 in yet, do it now. Click Refresh, then it will say you need to update the bootblock and firmware. Do the Bootblock first, just click the Update Boot Block button. Once thats done, click Update Firmware. After your V2 reboots, you're set. Copy the BBX files you want back to your device (Id recommend formatting it because a LOT has changed since the versions you're running) and you should be good to tune.

[Tordne]

There is a general knowledgebase article HERE (http://support.efilive.com/kb_article.php?ref=7243-SFGL-2949) that covers bootblock and firmware updates.

You may also want to try reverting back to the older drivers (see this POST (http://forum.efilive.com/showthread.php?16487-Other-problems&p=146721&viewfull=1#post146721)). Some customers have reported the Tune Tool hangs on startup with the FlashScan V2 connected. We're looking into that presently.

[AllOutPerformance]

Got it.thanks guys.works great again.