Wondering if EFILive can create a page showing what can be done to each module.

[Brian1]

Interested in seeing a page or pdf file created showing at the current public release what can be done to each ECM, TCM, PCM. Info to show would be list each module EFILive can read and write to. Include a pic of the module will be of help to identify modules. Possible to include all OS versions under each of the modules. Then indicate if can be written to in either Cal or Full or both flash procedures from the V7.5 software. Also if can be read and of course again Cal or Full or Both types of flashing from the V2 itself.

Brian

[Taz]

Hello Brian,

From memory, some of this information exists ... in various documents.

For E38, E67, & E37 ECM service numbers and compatible OS see the thread below:

http://forum.efilive.com/showthread.php?9805-E38-E67-OS-compatibility-list


For LS1B service numbers and compatible OS (and some other PCM / ECM) see the thread below:

http://forum.efilive.com/showthread.php?14200-PCM-Conversion-Information

Photos of the PCM / ECM / TCM are contained in the "Bench Harness Tutorial" - which would have downloaded with the EFILive software.

All of the information you asked about would probably exceed a thousand of pages of print ... sort of like asking Microsoft for a document that will tell you everything Windows 7 can do, what peripherals are compatible, and how to configure each.

Most advanced users of EFILive, just like Microsoft products, are self educated via hours of "hands on" experience and research. There is a publishing company developing a "How to Tune with EFILive" type manual - not yet in print.


Regards,
Taz