tune tool issue

[AllOutPerformance]

I plugged in todAY to flash a car and the v2 wont sync with the tune program.Tried two different usb cables,also did the latest updates and checked firmware.All is newest version,checked for updates and installed and still same issue.I tried my other v2 same issue,worked 2 days ago haha.The status bar gets locked up about 1/4 way and never responds.any info would be great.Thanks.FYI the scan tool works but freezes when i try to stop program.
Nathan

[joecar]

Nate,

manually download/install from the downloads page at www.efilive.com... and then using V8 S&T software, program all BBx files into V2 again.

[AllOutPerformance]

I did all that.ill try again.maybe doing it wrong.

[Blacky]

After downloading and re-installing like Joe said, don't do the "check for new updates" - the update may be causing the problems.

Regards
Paul

[AllOutPerformance]

Ok so just download the new 8 version again download it and install it again.Do not check for updates and see if it works again.And if it doesnt?

[AllOutPerformance]

Ok did that,joe what do you mean program all the bbx files into v2?
As of right now i manually downloaded the newest 8 version and loaded it in,i did not search for updates.right now im still in the same situation,locks up 1/4 way threw validation.

[Blacky]

Can you find the matching *.htx file in the folder:
\My Documents\EFILive\V8\Trace.
The file will be called something like this: E38_W_20110603_154924.htx
Where the E38 will be code for the controller you are attempting to flash.
The "W" means write (i.e. flash)
The 20110603 is the year, month and day
The 154924 is the hour,minute and second
that you attempted the reflash.
Please send that file to me at paul@efilive.com

One other thing to try if you have not already is to download the USB Manager from the Utilities section here:
http://www.efilive.com/index.php?option=com_content&view=article&id=48&Itemid=133
and install the V2.02.04 USB drivers.

Regards
Paul

[AllOutPerformance]

\My Documents\EFILive\V8\Trace
this file is blank nothing in there

[joecar]

Ok did that,joe what do you mean program all the bbx files into v2?
...
Open V8 S&T Software, goto F5:BBX, click the down arrow on the right side of the Program button and
select Program ALL Required Data (slower), and let it finish.

[AllOutPerformance]

Also i already had the auto usb file thing,i also ran it in admin for win7.I dont understand its been stable for 2 months no issues,i hadnt changed or updated and today it just wouldnt run.

[Blacky]

\My Documents\EFILive\V8\Trace
this file is blank nothing in there

You may need to switch on tracing in the EFILive HAPI program. See image for required settings.

Regards
Paul

[AllOutPerformance]

Blacky i set the trace to that.It was already enabled just was at 50 not 100.

Joe everytime i try and program it i get a error message.

[AllOutPerformance]

Ya so far everytime i try and progtam te bbx files in either the scan tool or tune tool it gives me a error message

[AllOutPerformance]

ya so no luck.
Someone want to take control of my laptop and try and fix this turd for me i really need this thing to work tomorrow

[AllOutPerformance]

Ok re configed the bbx files got it to program but still a no go.

[Tordne]

Hi there,

Can you please email me (support@efilive.com). Just include for my benefit a very quick summary of the problem you're still having (after all the "stuff" you've attempted) and I'll see what I can do. I'll email you back with some instructions.

Cheers,

[AllOutPerformance]

I just sent a email.Thanks

[AllOutPerformance]

Ira to save the day.Thanks Ira.

[joecar]

Was was the answer...?

[Ira]

Backdate the USB drivers.

Ira

[joecar]

Ira, thanks.