Motor goes into Limp and triggers P0606! HELP!

[TBMSport]

OK guys...I'm at my wits end. We're talking an E67 TBSS LS2 with CAI and Burst Knock zero'd out. Everytime I jab the throttle or WOT from idle it goes into limp mode.:help2:

You can tell the LIMP MODE kicking in when the red AFR dips. I've attached some logs. Any ideas where to make adjustments.
11258
11259
11260
11261
11262:help2:

[AllOutPerformance]

Did you change t body?have u logged gmcpufault.I'm dealing with the same issue myself.have you checked all your voltage to the pedal and tbody?did you change the OS? Anything.g out of range?

[gmh308]

You sure you have the right TBSS base calibration Jesse?

[TBMSport]

gmh308...that's exactly what was wrong. After I posted I compared my VE tables and low and behold somewhere in my messing around with calibrations I had made several Generate VE Coefficients Calculations and my Base numbers were WAYYYY off. I started with a stock calibration and she's all good now...well still freaking out with TC/Stabilitrak and PE is a bit delayed, but I think I have the fix for those figured out. Thanks guys.