View Full Version : 1 Meg Delphi computer
Harrismarine
July 4th, 2011, 04:56 PM
Hi guys, I am trying to run the 1mb comp with cable throttle..... I have it all working and running on an engine but no matter how much I add to the VE table the motor runs super lean with no change in fueling at all. I am getting P0351 and P0654 coming up??? Something is stopping me adjusting fuel by the VE table, any thoughts??? When I change back to the 512mb one the engine runs fine and the tac starts working :doh2:
It is Maffless tune
Thanks Mike
Taz
July 4th, 2011, 09:18 PM
Hello Harrismarine,
A little more information would be helpful:
What are the service number and hardware number on the 1 Mb LS1-B PCM you are trying to use ?
Where is the wiring harness you are using from ? (i.e. Camaro / truck / custom)
The 512 Kb PCM would use Blue / Red connectors, while the 1Mb PCM would use Blue / Green connectors. I take it you are switching these back and worth as you change PCMs, or have "trimmed" the Red connector to fit the 1 Mb PCM.
In trucks - most (but not all) of the pinouts are the same between model years - with the exception of the O2 sensors.
When you get a chance, please post both of the tunes you are using (512 Kb and 1 Mb).
Regards,
Taz
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.