need bigger injectors asap

[JCA]

Hi Guys, need some advise / help runing a 383ci ls1 with gt42 on 14psi and e85 with 80pound injectors , the duty cylce is thu the roof they sill seem to be delivering the required amount of fuel 0.78lamba but they r hitting 140% at full noise on 90psi fuel pressure so i need something bigger the biggest high impedance injector i have found so far r 1000cc but i don't reckon they will do the job is there a way of getting a low impedance injector to run on a ls1 pcm unless some one knows were to getting a 1600cc high impedance injector?- thanks

[Redline Motorsports]

Contact these guys.....there not cheap but super high quality and they provide the correct data...

http://www.injectordynamics.com/injectors.html

The are 72's, 98's, 115 and 240! all high impedance and plug and play.....

Howard

[L31Sleeper]

Contact these guys.....there not cheap but super high quality and they provide the correct data...

http://www.injectordynamics.com/injectors.html

The are 72's, 98's, 115 and 240! all high impedance and plug and play.....

Howard
x2

I also highly recommend Injector Dynamics.
If for some reason you do need a Low impedance injector you can run them on your LS1 PCM
with one of these Versafueler <== Link (http://www.acceleronics.com/versafueler.htm)

-Justin

[driver456]

I'm running the id2000's on a SC 427,8lbs of boost with 60% e-85 and my injector duty cycle is only 57%.I mix e-85 with gas.I'm easing in on a full tank of e-85............Paul

[JCA]

not worried about hp (800rwhp) as its makeing heaps just don t want the injectors fallen over i always like to have a little bit in reserve