Cant pull tunes off my ecm Help!

[chaserose]

It goes through all the steps until this

http://i1085.photobucket.com/albums/j423/chaserose/22516091.jpg

All help would greatly be appreciated

[06redram]

Did you update to the newest software and firmware if not do so. That should fix it. How to update go to start, all programs look for EFILive high light V7 drop to tools check for updates than high light firmware programmer do the same for V8 update

[chaserose]

Yes and double checked that

[06redram]

If that does not work uninstall V7 and V8 then reboot and reinstall V7 and V8

[chaserose]

Tried that to..............

[Tordne]

Could you please attempt to read the ECM using the V8 software? if it fails please see this knowledgebase article (http://support.efilive.com/kb_article.php?ref=8254-QOGC-9586) and send me (support@efilive.com) the file relating to the failed attempt.

[Fastorange]

I am also having a issue with an lb7 that is like this.. everything is up to date and i tryed pulling fuses and unhooking batterys... this is what i get..

19:55:20.217: Scanning for EFILive FlashScan V2 HAPI
19:55:20.233: Autodetect interface ...
19:55:20.389: Interface firmware version: 2.7.14
19:55:20.389: Connection to [FSV2] interface is OK
19:55:20.404: USB driver version: 2.8.20
19:55:20.404: USB library version: 3.2.4
19:55:20.404: Interface firmware model: FSV2
19:55:20.420: Interface firmware model: FSV2
19:55:20.420: Interface firmware version: 2.7.14
19:55:20.950: Autodetect interface ...
19:55:20.966: Interface firmware version: 2.7.14
19:55:20.966: Connection to [FSV2] interface is OK
19:55:20.966: Autodetect PCM...
19:55:21.996: PCM not detected.
19:55:21.996: Interface firmware date: Jul 03, 2011
19:55:22.011: FlashScan serial number: 003750325084
19:55:22.011: FlashScan license number: 003750325084
19:55:22.027: Disconnecting ...
19:55:22.214: CAN-VPW Bridge Deactivated
19:55:22.214: Disconnected
19:55:22.869: Scanning for EFILive FlashScan V2 HAPI
19:55:22.885: Autodetect interface ...
19:55:23.088: Interface firmware version: 2.7.14
19:55:23.103: Connection to [FSV2] interface is OK
19:55:23.103: CAN-VPW Bridge Activated
19:55:23.166: Current protocol set to: "SAE J1850 VPW"
19:55:23.166: Autodetect PCM...
19:55:23.212: Connection to PCM is OK
19:55:23.212: Current protocol: "SAE J1850 VPW"
19:55:23.415: USB driver version: 2.8.20
19:55:23.431: USB library version: 3.2.4
19:55:23.431: Interface firmware model: FSV2
19:55:23.446: Interface firmware model: FSV2
19:55:23.446: Interface firmware version: 2.7.14
19:55:23.462: Interface firmware date: Jul 03, 2011
19:55:23.462: FlashScan serial number: 003750325084
19:55:23.478: FlashScan license number: 003750325084
19:55:23.743: Getting status...
19:55:23.774: Status: OK.
19:55:24.492: Bootloader version: DLB7_v1.3R (0496-61DA)
19:55:24.492: Preparing ECM for reading flash...
19:55:24.523: ECM seed is: $00FF
19:55:24.523: Unlock attempt 1 of 4
19:55:24.882: Unlock attempt 2 of 4
19:55:25.240: Not ready, waiting 1 second for retry...
19:55:26.488: Not ready, waiting 1 second for retry...
19:55:27.736: Not ready, waiting 1 second for retry...
19:55:29.000: Not ready, waiting 1 second for retry...
19:55:30.248: Not ready, waiting 1 second for retry...
19:55:31.496: Not ready, waiting 1 second for retry...
19:55:32.744: Not ready, waiting 1 second for retry...
19:55:34.008: Not ready, waiting 1 second for retry...
19:55:35.287: Not ready, waiting 1 second for retry...
19:55:36.535: Unlock attempt 3 of 4
19:55:36.894: Unlock attempt 4 of 4
19:55:37.268: Not ready, waiting 1 second for retry...
19:55:38.516: Not ready, waiting 1 second for retry...
19:55:39.764: Not ready, waiting 1 second for retry...
19:55:41.028: Not ready, waiting 1 second for retry...
19:55:42.276: Not ready, waiting 1 second for retry...
19:55:43.524: Not ready, waiting 1 second for retry...
19:55:44.772: Not ready, waiting 1 second for retry...
19:55:46.020: Not ready, waiting 1 second for retry...
19:55:47.283: Not ready, waiting 1 second for retry...
19:55:48.531: Initializing ECM...
19:55:49.389: Initializing ECM, step 1 of 4
19:55:49.389: Initializing ECM, step 2 of 4
19:55:50.169: Initializing ECM, step 3 of 4
19:55:51.682: Initializing ECM, step 4 of 4
19:55:51.963: ECM lock has been re-armed, attempting to unlock ECM again...

19:55:51.979: ECM seed is: $00FF
19:55:51.979: Unlock attempt 1 of 4
19:55:52.338: Unlock attempt 2 of 4
19:55:52.665: Not ready, waiting 1 second for retry...
19:55:53.898: Not ready, waiting 1 second for retry...
19:55:55.146: Not ready, waiting 1 second for retry...
19:55:56.409: Not ready, waiting 1 second for retry...
19:55:57.657: Not ready, waiting 1 second for retry...
19:55:58.890: Not ready, waiting 1 second for retry...
19:56:00.122: Not ready, waiting 1 second for retry...
19:56:01.354: Not ready, waiting 1 second for retry...
19:56:02.618: Not ready, waiting 1 second for retry...
19:56:03.866: Unlock attempt 3 of 4
19:56:04.225: Unlock attempt 4 of 4
19:56:04.584: Not ready, waiting 1 second for retry...
19:56:05.816: Not ready, waiting 1 second for retry...
19:56:07.048: Not ready, waiting 1 second for retry...
19:56:08.312: Not ready, waiting 1 second for retry...
19:56:09.560: Not ready, waiting 1 second for retry...
19:56:10.808: Not ready, waiting 1 second for retry...
19:56:12.040: Not ready, waiting 1 second for retry...
19:56:13.273: Not ready, waiting 1 second for retry...
19:56:14.536: Not ready, waiting 1 second for retry...
19:56:15.784: Initializing ECM...
19:56:16.533: Initializing ECM, step 1 of 4
19:56:16.533: Initializing ECM, step 2 of 4
19:56:17.282: Initializing ECM, step 3 of 4
19:56:18.764: Initializing ECM, step 4 of 4
19:56:19.029: ECM lock has been re-armed, attempting to unlock ECM again...

19:56:19.185: Initializing bootloader...
19:56:19.248: Error: Failed. Controller has returned to normal operation, please retry the operation.
19:56:19.466: Initializing bootloader, step 1 of 3
19:56:19.466: Error
19:56:19.466: Disconnecting ...
19:56:20.371: CAN-VPW Bridge Deactivated
19:56:20.371: Disconnected
19:56:26.752: Done!

[Sledhead]

I have the same symptoms. Have you had any success yet?

[joecar]

Try with the latest software/firmware: Release-Candidate-2-Aug-19-2011

(http://forum.efilive.com/showthread.php?17096-Release-Candidate-2-Aug-19-2011)Current versions: V7.5.7.178, V8.2.1.168, bb 2.07.03, fw 2.07.21.

Edit: latest software is now V7.5.7.180, 8.2.1.170, 2.07.03, 2.07.22.

[Tordne]

Please download the pre-release version which has been pretty comprehensively tested. It is available from our forum thread HERE (http://forum.efilive.com/showthread.php?17096-Release-Candidate-2-Aug-19-2011).

You need to download both the V7 and V8 versions and update your FlashScan V2 bootblock/firmware with the versions included in the V8 install.

Here are a couple of knowledgebase articles relating to software and firmware updates for future reference:
- Software updates (http://support.efilive.com/kb_article.php?ref=5404-IJZV-0820) (get from forum thread this time though).
- Firmware updates (http://support.efilive.com/kb_article.php?ref=7243-SFGL-2949)

If you still have issues please see THIS (http://support.efilive.com/kb_article.php?ref=8254-QOGC-9586) knowledgebase article and email me (support@efilive.com) with the trace information (just the file for the failed flash). Please try both V7 and V8 flashes.

Cheers,

[cumminsDK]

I am having a similar issue on an 04 LB7 today, when trying to read it made it to initializing ECM Step 4 then said ECM returned to normal operation, bootloader step three, then gave me the bootloader rejected message. i have tried everything short of unistalling and reinstalling software, pulled fuses, disconnected remote start completely, powered down rebooted v2 and pc. Neither V7 or V8 would read it and i checked status said unsecured, and i have the latest software build 180 bootblock and and firmware are up to date

[joecar]

I am having a similar issue on an 04 LB7 today, when trying to read it made it to initializing ECM Step 4 then said ECM returned to normal operation, bootloader step three, then gave me the bootloader rejected message. i have tried everything short of unistalling and reinstalling software, pulled fuses, disconnected remote start completely, powered down rebooted v2 and pc. Neither V7 or V8 would read it and i checked status said unsecured, and i have the latest software build 180 bootblock and and firmware are up to dateCan you post the text log from the V7 software when this happens (i.e. same as post #7 above).

[cumminsDK]

i will as soon as i get a chance to hook up later today

[cumminsDK]

Connected to my moms 04 today and it worked maybe it was something on that particular truck