chrisincomfort
July 16th, 2011, 05:32 AM
Hello i am been unable to the ECM in my 2010 Silverado HD with the Duramax. But I can read any other ECM I hook up to.
This is what I see when I try to read it
14:28:09.877: Preparing ECM for reading flash...
14:28:09.893: ECM seed is: $4F3D
14:28:09.893: Unlock attempt 1 of 4
14:28:10.002: Initializing ECM...
14:28:11.281: Error: Failed. Controller has returned to normal operation, please retry the operation.
14:28:11.921: Total time: 00:00
14:28:11.921: Rebooting ECM... (please wait up to 8 seconds)
14:28:13.044: ECM has booted successfully...
14:28:14.058: Clear emisison related DTCs...
14:28:14.058: Clear DTCs for all modules...
14:28:16.133: Autodetect interface ...
14:28:16.336: Interface firmware version: 2.7.14
Thanks for any help.
BTW the truck has an DSP5 tune.
Chris
This is what I see when I try to read it
14:28:09.877: Preparing ECM for reading flash...
14:28:09.893: ECM seed is: $4F3D
14:28:09.893: Unlock attempt 1 of 4
14:28:10.002: Initializing ECM...
14:28:11.281: Error: Failed. Controller has returned to normal operation, please retry the operation.
14:28:11.921: Total time: 00:00
14:28:11.921: Rebooting ECM... (please wait up to 8 seconds)
14:28:13.044: ECM has booted successfully...
14:28:14.058: Clear emisison related DTCs...
14:28:14.058: Clear DTCs for all modules...
14:28:16.133: Autodetect interface ...
14:28:16.336: Interface firmware version: 2.7.14
Thanks for any help.
BTW the truck has an DSP5 tune.
Chris