Question about my fuel trim cells

[n8dogg]

I thought it would be a good idea to poke around in the learned fuel trim cells and reset stuff since I recently changed the VE table... hope that wasn't a bad idea :angel_innocent:

Any how... I noticed in bank one my Aux. Cell (21) Deceleration reads 0% for bank one and -100% for bank 2.

Is this normal?

I do have a LC-1 WB in place of the stock narrowband in my bank 2 header.

1143511436

[joecar]

Hi n8,

That one cell shows -100%, and all of the other cells show 0%...

this is what they look like immediately after being cleared (the PCM hasn't yet had a chance to save new trims).

Drive some more and check the FTC's again.