V2 to LC1 issue?

[2007chevy5.3l]

Hi everyone, I seem to have an issue with logging the AFR. I have the cable that connects from the LC1 via phone jack plug to the V2. In my PID selection when I try to log it there is only 2 numbers. Ex. if im at idle it shows 14.5 on the gauge but shows 4.5 on the PID. Whats causing that? Connection problem? Any help would be great. Thanks

[mr.prick]

Check the fuel type in the LM Programmer software.

Is the gauge connected to the analog wires?

[2007chevy5.3l]

Sorry, im very new to this. How do I go about checking the fuel type in the LM programmer software.
Im using the Serial cable for V2 to Innovative LC1. The gauge itself is connected to the wires that comes with the LC1 kit if thats what you mean?

[mr.prick]

You will need to connect the LC-1 to a laptop to change the fuel type.

[2007chevy5.3l]

Ok, I think I have an idea of what your talking about

[2007chevy5.3l]

Bumping this thread. I hooked the LC1 to the innovate logworks program on my laptop and checked the selected fuel type. Gasoline was selected and it still reads (ex.) 5.11 instead of 15.11 on the efilive scan tool. What else could I check?

[joecar]

Which V2 firmware version do you have...? Try 2.07.21 from here: Release-Candidate-2-Aug-19-2011 (http://forum.efilive.com/showthread.php?17096-Release-Candidate-2-Aug-19-2011)

[2007chevy5.3l]

My V2 was updated last week. I have the V7.5 and V8 versions

[joecar]

You are looking at the pid EXT.WO2AFR1, right...?

[joecar]

Hi everyone, I seem to have an issue with logging the AFR. I have the cable that connects from the LC1 via phone jack plug to the V2. In my PID selection when I try to log it there is only 2 numbers. Ex. if im at idle it shows 14.5 on the gauge but shows 4.5 on the PID. Whats causing that? Connection problem? Any help would be great. ThanksCan you do this:
- on the V2, there is a screen that shows wideband AFR in real time, what is displayed here...?
- post a screenshot of the V2 scantool's Dash B chart showing this pid.

[2007chevy5.3l]

Sure am.
Ive connected to two different trucks (my vehicle and a friends) and it just reads with the 1 missing (5.11 AFR)

[2007chevy5.3l]

11822

Im not sure how to get to this - on the V2, there is a screen that shows wideband AFR in real time, what is displayed here...?

[joecar]

Can you post that log file here...

On the V2 keypad/LCD, you can navigate down the menu tree (I forget where exactly) until you end up on a screen that shows wideband AFR in real time... I'll find the exact place later tonite.

[2007chevy5.3l]

Heres a live log

11823