Somethings wrong!! Car adding timing

[1fastgto]

OK I dont know whats going on but I have attached the log and the tune that I currently have on the car. somewhere somehow its adding timing all over the place. The car is adding as much as 6 or 8 degrees in some places. can anyone look at it and see if they can figure it out. The timing doesnt even come close to what I have in the table. Thanks!

[minytrker]

I didnt have time to look through the tune but the first thing I notice was all the out of ranges. Fix all these first

EFILive Custom Calibrations
{A0001} Forced Octane Scaler Percentage, was out of range when loaded.
{A0002} Octane Scaler Limiter, was out of range when loaded.
{A0004} MAP Disable TPS VE Table, was out of range when loaded.
{A0005} RPM Disable TPS VE Table, was out of range when loaded.
{A0006} TPS Disable TPS VE Table, was out of range when loaded.
{A0017} N20 Monitor VE Multiplier Table RPM Enable, was out of range when loaded.
{A0018} N20 Monitor VE Multiplier Table MAP Enable, was out of range when loaded.
{A0007} TPS VE Table, contained one or more out of range values when loaded.

I have seen weird things happen when all things are out of range. I always fix that before I start tuning a car.

[1fastgto]

I didnt have time to look through the tune but the first thing I notice was all the out of ranges. Fix all these first

EFILive Custom Calibrations
{A0001} Forced Octane Scaler Percentage, was out of range when loaded.
{A0002} Octane Scaler Limiter, was out of range when loaded.
{A0004} MAP Disable TPS VE Table, was out of range when loaded.
{A0005} RPM Disable TPS VE Table, was out of range when loaded.
{A0006} TPS Disable TPS VE Table, was out of range when loaded.
{A0017} N20 Monitor VE Multiplier Table RPM Enable, was out of range when loaded.
{A0018} N20 Monitor VE Multiplier Table MAP Enable, was out of range when loaded.
{A0007} TPS VE Table, contained one or more out of range values when loaded.

I have seen weird things happen when all things are out of range. I always fix that before I start tuning a car.

No matter what I change them to, high or low limits they all show out of range all the time.

[slows10]

Try disabling spark smoothing.

[1fastgto]

Try disabling spark smoothing.

Yup tried that! lol!

[slows10]

You are also logging with 32 channels. Max should be 24.

[slows10]

the tune you posted has it enabled. edit. I see now it is disabled by temp. but it still says yes to enable

[1fastgto]

the tune you posted has it enabled. edit. I see now it is disabled by temp. but it still says yes to enable

Yes this tune had it enabled, I have already tried to disable it and it made no change in the timing being added. As for logging I was just trying to see what was going on, wasnt trying to do the VE or anything. was sort of throwing the kitchen sink at it.

[minytrker]

I'll fix it and post it back up.

[minytrker]

11641
Try this