PDA

View Full Version : 12618164 -E67 ECM Full Flash Problem



TBMSport
August 10th, 2011, 09:28 AM
I'm being notified by the V8 that there is no capability to full reflash my E67. Am I missing something? OS #12618164 is on the Compatibility list. :help2:

GMPX
August 10th, 2011, 10:07 AM
"no capability" or "Compatibility" problem? What is the exact message?

TBMSport
August 10th, 2011, 10:14 AM
Sorry...it says "Full flashing for E67 controllers is not supported"

TBMSport
August 10th, 2011, 10:24 AM
Additionally, when I do a Systems and Calibrations flash on the V7.5 side, it goes through the motions, but when I retrieve the calibrations it's the old original calibrations.

ScarabEpic22
August 10th, 2011, 10:51 AM
Is the tune file a .ctd you're trying to flash in V8?

Thats weird, but then again Ive only done 2 full flashs period in the entire time Ive owned EFILive. 1 on my E67 and 1 on my T42. With that same OS ha.

GMPX
August 10th, 2011, 11:18 AM
TBMSport, you aren't going mad. I just checked and there is a few late model controllers we haven't activated full flashing on, E67, E83 and the Bosch V6 ECM's.
The E83 is an oversight as I remember testing this myself, I'll check with Paul on the E67, obviously we can full flash them in V7 so it shouldn't be too much work to activate and test it for V8.

Cheers,
Ross

TBMSport
August 10th, 2011, 12:52 PM
THANK GOD, ROSS!!:cucumber: I thank you...and this ECM thanks you for sparing its fate at the bottom of a city dump!

TBMSport
August 18th, 2011, 02:42 PM
Any update on this?

GMPX
August 18th, 2011, 03:47 PM
Yes, E67 full flash for the V8 software will be released in the next update, due this weekend in fact.

Cheers,
Ross

TBMSport
September 10th, 2011, 06:12 PM
Has this been addressed in the August update?

GMPX
September 10th, 2011, 10:41 PM
I remember test full flashing the E67 myself with V8 before sending the files on to Paul to get included in the update. Have you downloaded the update?

TBMSport
September 11th, 2011, 01:59 AM
Got it...had to go through the various threads and I made the mistake of hitting UPDATE so it reverted back to the older version. It's all good now. Thanks