AutoCal Modes?

[jizay]

What does Full 1 full 2 ..etc mean? How is it different from Prog 1...etc??

This was posted previously by someone else, but was never answered.
The quick start guide does not discuss the 'Full' modes.

Thanks,

Jason

[Ira]

I believe it's full flash versus calibration only flash.

Ira

[jizay]

How is it different from 'Prog' ?

[Ira]

Well, I assume prog is Calibration only.

Ira

[Tordne]

Just updated the documentation. The 'Prog' options are calibration only flash operations which should be performed under normal circumstances (unless directed by your tuner). The 'Full' options are full-flash operations and download both the operating system and calibration data to the ECM/TCM controller.

[JPaupst]

So when not using a DSP tune and only trying to use the Autocal for individual tunes one would hook it up to the truck and just tune with the "program 1" and not full flash as im assuming full flash is for DSP tunes , correct?

[ScarabEpic22]

Depends, if LLY/LBZ/LMM then you can cal-flash, LB7s need a full reflash every time for DSP tunes.

For non-DSP tunes, calibration only flashes are all that is required to change the tune (unless you're changing the OS).

[JPaupst]

Its an LBZ. So i can only do the full flash and not the cal flash or whatever it is? So is that just prog 1-5 or does it say full flash 1-5? sorry newb here still waiting for my tunes but wana be ready when i get them.

[Tordne]

So this is how it works out. A cal-flash is performed generally for all ECMs except an LB7 with a DSP5 installed. The cutom tables on the LB7 DSP5 didn't all fit into the calibration memory area and overflowed in the OS area, thats whay afull-flash is required when changing a LB7 DSP5 calibration.

You're fine with an LBZ to do cal-flashes.

[JPaupst]

So even though im not using a dsp switch and tunes and am only running individual tunes it is still fine to just cal flash?

[Tordne]

Yup cause you're only changing the data in the calibration area.

[JPaupst]

Ok thanks for the help , Im sure ill have plenty more questions for ya in the near future.