Dirk Diggler
January 9th, 2006, 06:01 PM
So my theory is with the help of Black02SS and AJ-1 LOL (Tordne)
Ross and Paul being the gracious programmers they are added a new pid for us a while ago that really didnt get any party time. The pid in question is the GM.VETABLE_DMA pid. Here is a few thoughts about this pid
1. I assumed this pid is a final value of the initial ve table value (what were used to working with). Since its a final value that means all the idle routines, filtering, blending etc have been added or subtracted from the intial value. Moreso smoothing and interpolating
2. Wouldnt it be better to use a final value that is more real world like than an initial value.
3. When your map is done with the instructions to follow you will have a table you copy and paste back into the tuner ready for flashing
Instructions
1. Add the pid its in the "tune" menu in the drop down list
2. The tuner needs to display default units (g*K/kpa)
3. make a calc pid to log this pid with Ben correction eg (vetable * ben) = value to be copoied back to the tuner
*CLC-00-002
% 0.00 +10.00 .2 "({GM.VETABLE_DMA}*{CALC.BEN_PLX1})"
Note use you own Ben facotr pid if it differes from the PLX
What this does is instead of applying your BEN factor to your ve table, you apply it to the Lookup Value as a calcuated PID. This result IS what you place in the ve table. (you must use g*K/kPa)
Ross and Paul being the gracious programmers they are added a new pid for us a while ago that really didnt get any party time. The pid in question is the GM.VETABLE_DMA pid. Here is a few thoughts about this pid
1. I assumed this pid is a final value of the initial ve table value (what were used to working with). Since its a final value that means all the idle routines, filtering, blending etc have been added or subtracted from the intial value. Moreso smoothing and interpolating
2. Wouldnt it be better to use a final value that is more real world like than an initial value.
3. When your map is done with the instructions to follow you will have a table you copy and paste back into the tuner ready for flashing
Instructions
1. Add the pid its in the "tune" menu in the drop down list
2. The tuner needs to display default units (g*K/kpa)
3. make a calc pid to log this pid with Ben correction eg (vetable * ben) = value to be copoied back to the tuner
*CLC-00-002
% 0.00 +10.00 .2 "({GM.VETABLE_DMA}*{CALC.BEN_PLX1})"
Note use you own Ben facotr pid if it differes from the PLX
What this does is instead of applying your BEN factor to your ve table, you apply it to the Lookup Value as a calcuated PID. This result IS what you place in the ve table. (you must use g*K/kPa)