Serial Port Pin Outs

[Tre-Cool]

Can some one point out the location of the above or post for me.

trying to make a cable up to connect my tech edge.

it's not in my manual.

[joecar]

For V2, see here:


V2 serial/digital wideband logging:
showthread.php?t=8858 (http://forum.efilive.com/showthread.php?t=8858)
showthread.php?t=8115 (http://forum.efilive.com/showthread.php?t=8115)
showthread.php?t=10251 (http://forum.efilive.com/showthread.php?t=10251) post #2

V2 serial/digital AFR input (LC-1):
showthread.php?t=8115 (http://forum.efilive.com/showthread.php?t=8115)
showthread.php?t=7532 (http://forum.efilive.com/showthread.php?t=7532)
showthread.php?t=8348 (http://forum.efilive.com/showthread.php?t=8348)
showthread.php?t=9340 (http://forum.efilive.com/showthread.php?t=9340) post #3

V2 serial/digital AFR input (PLX):
showthread.php?t=7726 (http://forum.efilive.com/showthread.php?t=7726&highlight=convert+PLX+serial)

V2 serial/digital AFR input (AEM):
showthread.php?15748-AEM-compatibility (http://forum.efilive.com/showthread.php?15748-AEM-compatibility)
showthread.php?16636-Installing-an-AEM-Wide-Band-02-and-logging-afr (http://forum.efilive.com/showthread.php?16636-Installing-an-AEM-Wide-Band-02-and-logging-afr)
showthread.php?16904-AEM-EUGO-Lambda-W-B-how-to-connect-to-Flashscan-V2 (http://forum.efilive.com/showthread.php?16904-AEM-EUGO-Lambda-W-B-how-to-connect-to-Flashscan-V2&p=151205#post151205)

V2 serial/digital AFR input (Zeitronix):
showthread.php?14743-Strange-AFR-from-Serial-ZT-2-OFF-by-Factor-of-10 (http://forum.efilive.com/showthread.php?14743-Strange-AFR-from-Serial-ZT-2-OFF-by-Factor-of-10)

LC-1 free air calibration from V2:
showthread.php?p=93571#post93571 (http://forum.efilive.com/showthread.php?p=93571#post93571)

[joecar]

For TE, isn't there a pinout somewhere here: http://wbo2.com

[mr.prick]

http://forum.efilive.com/attachment.php?attachmentid=10621&d=1304290299

[Tre-Cool]

perfect mr prick. exactly what i was wanting.

[Tre-Cool]

i have made 3 cables now, trying different pinouts and i can't get this fracking cable to work.does anyone have a techedge device talking directly to their flashscan and able to do me a pinout diagram.

i do have a working cable myself, but it doesnt follow the pinout diagram and it farken works!!! however i want to have some spares as this one is pretty crappy.

okay. found the problem. the above diagram is wrong. the tx/rx wires are around the wrong way.

here is my working cables using 4 wires. yellow-green-red-black

with both the clips facing you.

RJ11 -------------------- RJ45
1-blank-------------------1-blank
2-black/earth-------------2-blank
3-blank-------------------3-blank
4-blank-------------------4-black/earth
5-red/rx------------------5-blank
6-green/tx---------------6-red/tx
---------------------------7-green-rx
---------------------------8-yellow/nbsim. you dont need to use this one. i just left it as it wasnt in the way. however i cut it off for the rj11 plug.

[swingtan]

RJ45-----RJ12
5--------5
3--------2
2--------1

Made 3 up in the past 2 weeks and all work fine