Scan/Tune

[Harrismarine]

Can someone help me sort an issue with the scan tool not referencing correctly in the tune tool, eg with the scan tool running and logging the main VE table, it will not track in the same cell in the main VE table in the tune tool. I have checked everything I can think of without success. It follows up and down in in the RPM column but will not move out across the map column even though is is showing in correct cells in the scan tool :doh2:

Thanks Mike

[joecar]

Hi Mike,

In the scantool, on the PIDs tab, on the SAE.MAP pid, do rightclick->Metric.

Check that you are logging SAE.MAP [kPa] and not GM.MAP [V].

[Harrismarine]

Thanks joecar, changing from imperial to metric fixed it

Mike