Trailbalzer red the file but refused to flash and the car won't start again

[odd boy]

Hi,

Last night I red 2007 trailblazer ecu and broke the licenses successfully, but when i went to flash it, it refused and the car now doesn't start.

Looks like it stop before erasing the memory....

Please advice.....

Thanks,

[Tordne]

We'd need to get you to first make sure you have the latest software and firmware installed:
- Software updates (http://support.efilive.com/kb_article.php?ref=5404-IJZV-0820) DO NOT perform the Check for Updates after installation.
- Firmware updates (http://support.efilive.com/kb_article.php?ref=7243-SFGL-2949)

If it is still failing you'll need to send through (email support@efilive.com) the trace as per this article (http://support.efilive.com/kb_article.php?ref=8254-QOGC-9586).

[ScarabEpic22]

Which engine, I6, or 5.3/6.0? Different PCM (P12 2MB) or ECM/TCMs (E67/T42).

[odd boy]

P12 with 2MB

[GAMEOVER]

Are you flashing using V8? I had the same thing happen to me, tried flashing using V7 and It would quit after 20 seconds and all kinds of error's would show up till I tried it with V8 software.

[ScarabEpic22]

Ok so 07 P12 as thats the only year with 2MB flash.

Try it with V8 as GAMEOVER suggested, if that doesnt work probably need to send trace files to support.