PDA

View Full Version : No Fuel Level After Flash



ls1mike
November 11th, 2011, 02:32 PM
Hey guys, scanned the p08 off my 99 s10 4cyl and had a little trouble uploading my edits so ended up using a full reflash. After the flash the fuel level on the dash is not working. I notice the Fuel System has no calibration tables on this tune. Can anyone provide a file that does have the calibrations (flex fuel 2.2?) or perhaps some way to return the stock settings? Or is this related to VATS somehow? Thanks, Mike

GAMEOVER
November 11th, 2011, 04:20 PM
Have you tried disconnecting the battery for a couple of minutes???

ls1mike
November 13th, 2011, 10:10 AM
No luck after disconnecting battery. Whats next?

slows10
November 13th, 2011, 11:50 AM
What tune did you full flash in? Can you post it?

ls1mike
November 13th, 2011, 07:06 PM
No problem, only changes made were to emissions reporting and speed limiter.

slows10
November 13th, 2011, 10:50 PM
G0915 is your problem. Read the description in the top right hand corner. That whole column is not supposed to be disabled. Enable the third line down. More than emmisions reporting and speed limiter has been changed in that tune. Just saying it is not a bone stock tune.

ScarabEpic22
November 14th, 2011, 06:04 AM
I agree with Slows10, the 4cyl PCMs share a lot of code with the P10s and my stock P10 file (and all tunes as they arent swaps) have a few of the Platform Options enabled from GM. Thats not a stock tune, or someone has modified it to run standalone.

ls1mike
November 14th, 2011, 06:55 AM
OK great info, my friend was messing with the computer I'm sure he changed a few things I missed thanks guys.

ls1mike
November 14th, 2011, 12:09 PM
Reflashed it tonight fuel works again thanks guys.