PDA

View Full Version : $0331 Error E38



Mike@Vengeance
November 17th, 2011, 05:36 AM
Guys finally figured everything out thanks to Ira.

The tunes are on the AC but when I go to load into the car I get the $0331 error.

I did a search on here and found a few people with the issue but no real answer of how to fix it . I am running the lastest greatest software released and everything else is working fine but just can not load due to the $0331 error.

Any help would be great.

Thanks Guys

Ira
November 17th, 2011, 09:09 AM
The help for this error is:


Request Out of Range ($31)
The vehicle does not support the requested OBD mode’s, sub-function’s parameter.
Contact EFILive if this error persists.

It would help us to answer the question if you posted all the possible information. Vehicle, OS, software and firmware versions.

Ira

Mike@Vengeance
November 18th, 2011, 07:25 AM
Ira the car is

2006 Z06

VIN 1G1YY26E865130400
OS 12605732
Calibration ID 12605731

Firmware on my V2 is 2.7.22

Any ideas???

Ira
November 18th, 2011, 09:48 AM
Can you flash it with V8 in pass through mode?
Did you update the scripts on the Autocal?

Ira