high idle d5750-d5751

[easymon]

Hey guys was trying to adjust when factory idle up kicks in and out my goal is want it to do to high idle any time coolant temp drops 175 deg.. So i adjusted d5751 put 175 in all colums . Then went to d5751 and put 1000 in all coulums but now stays at 1000rpm and wont drop to idle when i touch brake. Need some insight on this thanks . shannon

[icemanjc1]

Then went to d5751 and put 1000 in all coulums but now stays at 1000rpm and wont drop to idle when i touch brake. Need some insight on this thanks . shannon
Depending on how you changed your axis table, you need to drop one of the columns (somewhere in the 170-220 degree range) down to 750.

[easymon]

ok thanks . Do i need to make change in axis table?

[icemanjc1]

Change the #5 68.1 (stock) up to 175 on axis. Then use your 750rpm dip down from 1000 there at 175 to 220 on the D5751. That's how I'd do it.

[easymon]

Thanks will give that a try.