TAQCables sLM2 Serial Cables

[TAQuickness]

It's that time of year that I am acquiring materials for next years run of cables. To my surprise, and extreme frustration, material cost have doubled to quadrupled from last year and my suppliers are now requiring unrealistic minimum purchases. As of this post, I have 17 sLM2 cables in stock. I'm not sure if/when I'll be able to replenish my stock.

Suggestions, comments, feedback - all welcomed

[Tre-Cool]

Depending on whethor or not your el presidente wants to start a 3rd world war with china/russia over the middle east, it could get worse.

[schwoch1]

Depending on whethor or not your el presidente wants to start a 3rd world war with china/russia over the middle east, it could get worse.

Yah, and unfortunately, I think they (China, et al) know that they have the US over the proverbial barrel............ what can we do.....
Anyways,
TAQuickness..... If you can find another supplier that charges more but requires a smaller order, I would go that route and pass the cost along to the end user. Unfortunately I have had to do the same in my business (auto repair), all my costs have gone WAY up over the years, and I have had to pass those operating costs along. You may lose few cheapskate customers in the beginning, but in the long term, I feel you will not see hardly any difference in the end!!
Just my $.02.... keep up the good work, my 3 year old cable still works great!!!

Mike

[TAQuickness]

Thanks schwoch

Just so y'all know, my web sever has experienced a fatal hardware error. No ETA on having it back up. Please send me a pm for cable inquiries.

[TAQuickness]

Everything is back up and running. Should be anyway.

[joecar]

Cool :cheers:

[SW1911]

need one

[GMPX]

taquickness.com appears to be gone, I think you are out of luck.

[SW1911]

well im going to have to strip one down then

jim

[joecar]

well im going to have to strip one down then

jimJim,

Which wideband do you have...?

Regardless of wideband, they all follow the same "pattern", have a look here:


V2 serial/digital wideband logging:
showthread.php?t=8858 (http://forum.efilive.com/showthread.php?t=8858)
showthread.php?t=8115 (http://forum.efilive.com/showthread.php?t=8115)
showthread.php?t=10251 (http://forum.efilive.com/showthread.php?t=10251) post #2

V2 serial/digital input (LC-1):
showthread.php?t=8115 (http://forum.efilive.com/showthread.php?t=8115)
showthread.php?t=7532 (http://forum.efilive.com/showthread.php?t=7532)
showthread.php?t=8348 (http://forum.efilive.com/showthread.php?t=8348)
showthread.php?t=9340 (http://forum.efilive.com/showthread.php?t=9340) post #3
Getting-some-odd-s-from-my-LC-1-wideband-please-take-a-look-at-my-log (http://forum.efilive.com/showthread.php?22863-Getting-some-odd-s-from-my-LC-1-wideband-please-take-a-look-at-my-log) post #13

V2 serial/digital input (LC-2):
LC-2-Digital-Wideband-anyone-try-it-out (http://forum.efilive.com/showthread.php?23169-LC-2-Digital-Wideband-anyone-try-it-out)

V2 serial/digitial input (LM-2):
Flashscan-to-LM-2-Serial-Cable (http://forum.efilive.com/showthread.php?8737-Flashscan-to-LM-2-Serial-Cable)

V2 serial/digital input (PLX):
showthread.php?t=7726 (http://forum.efilive.com/showthread.php?t=7726&highlight=convert+PLX+serial)

V2 serial/digital input (AEM):
showthread.php?15748-AEM-compatibility (http://forum.efilive.com/showthread.php?15748-AEM-compatibility)
showthread.php?16636-Installing-an-AEM-Wide-Band-02-and-logging-afr (http://forum.efilive.com/showthread.php?16636-Installing-an-AEM-Wide-Band-02-and-logging-afr)
showthread.php?16904-AEM-EUGO-Lambda-W-B-how-to-connect-to-Flashscan-V2 (http://forum.efilive.com/showthread.php?16904-AEM-EUGO-Lambda-W-B-how-to-connect-to-Flashscan-V2&p=151205#post151205)

V2 serial/digital input (Zeitronix):
showthread.php?14743-Strange-AFR-from-Serial-ZT-2-OFF-by-Factor-of-10 (http://forum.efilive.com/showthread.php?14743-Strange-AFR-from-Serial-ZT-2-OFF-by-Factor-of-10)

LC-1 free air calibration from V2:
showthread.php?p=93571#post93571 (http://forum.efilive.com/showthread.php?p=93571#post93571)

[SW1911]

joe are you everywhere ??? lol aem-31400 not the favorite of the bunch i can see

[joecar]

lol


AEM UEGO 3140 is supported... wiring follows same principle (Rx and Tx crossed).

AEM-EUGO-Lambda-WB-how-to-connect-to-Flashscan-V2 (https://forum.efilive.com/showthread.php?16904-AEM-EUGO-Lambda-W-B-how-to-connect-to-Flashscan-V2&p=151205#post151205)