P12 BBx functions...

[ScarabEpic22]

Im looking to deliver an AutoCal to a customer but I cant right now because the P12 doesnt support BBR or BBF. I can BBL, but without being able to read or write to the PCM I cant deliver an AC.

Any idea when the EFILive crew might have a chance to implement BBR and BBF for the P12 (and BBL for the P08, should be able to do it by manually editing the Options.txt file now)?

Thanks!

[Chevy366]

P12 , the Red Headed Stepchild . :chair::chair::chair:
:chair:

[ScarabEpic22]

Think you mean the P10, the P12 is bad but the P10 is what it is because it was only used on 1 platform with 1 engine for 4 years. The P12 was only 4 years too, but it was used on 3+ platforms and ~4 engines.

Whats weird is the P12 has BBL, just no BBR/BBF yet while the P08 has only BBR/BBF but no BBL.

[Blacky]

Working on all 3...

Regards
Paul

[ScarabEpic22]

Working on all 3...

Regards
Paul

Thanks Paul!

[Chevy366]

Working on all 3...

Regards
Paul
Yeah ! :jump::santa2::jump::santa1:

[ScarabEpic22]

Any updates on these? Went to read a P12 today and V7.5 kept failing at 640kb. I can get the appropriate files to support if needed, I even pulled the Onstar and radio fuses and tried with high speed unchecked. No dice.

[Chevy366]

Usually the slow speed would work , but had it do the same thing on me a couple of times .
P12 gets no love . :bangin:

[ScarabEpic22]

Bumpity bump, any ETA for P12 BBX stuff Paul? Know its not a high priority, just trying to see when it might be done.

[Blacky]

Bumpity bump, any ETA for P12 BBX stuff Paul? Know its not a high priority, just trying to see when it might be done.

Thanks for the reminder :)
Regards
Paul

[Chevy366]

So the BBx for P12 didn't make it in? Trailblazer is acting funny and wanted to "read" (Tune section, not Scan) the PCM with V2 controller no-can-do has P10 and P11 but no P12, WHY?

[Blacky]

P12 has been in the V8 BBx software for a long time.

To add support for P12 to BBx, do this:
Right click in the blue section (of the [F5: BBX]->[F2: Scan] window) and select "Add", then right click the engine controller area and select P12.

Regards
Paul

[Blacky]

Sorry, you said "Tune not Scan", I read that as "Scan not Tune".
Paul

[Blacky]

I'll try again...

P12 has been in the V8 BBx software for a long time.

To add support for P12 to BBx (for reading and flashing), do this:
Right click in the blue section (of the [F5: BBX]->[F3: Tune] window) and select "Add", then right click the engine controller area and select P12.

Regards
Paul

[Chevy366]

Got it, thanks!
You tha man!

[Chevy366]

Well not getting there, seems I get a code about midway through read, $0281 No data received. The controller does the orange>blue LED flashes, then about midway through it stops instrument lights flash on and off, controller then flashes orange a few time then the error code displays.
P12 Config Files are present in EFILive Explorer, Explorer shows that there was an attempt to create a P12 (P12_0013) file in Read section, size is 1KB.

Never Mind!
Formatted the Config File and did the FlashScan P12 addition and programmed the controller again worked.

[Blacky]

After you get that error (and before powering off FlashScan), select the option to save a trace file: [F1 Scan Tool]->[F3 Scan Options]->[F1 Save Trace File].
Then use EFILive Explorer to copy the saved trace fiel to your PC and email it to me at paul@efilive.com,or attach it to this thread.

Regards
Paul