PDA

View Full Version : Lock up tuning and axis change



icemanjc1
December 29th, 2011, 03:27 PM
Anyone have problems with axis changes not taking effect? I've been changing 3-4 upshift shaft speed axis values in order to get 3rd to 4th gear lockup to work how I want (both T/H and D) but it doesn't seem to make any difference. OS 11352409.

2007 5.9
December 29th, 2011, 04:02 PM
Anyone have problems with axis changes not taking effect? I've been changing 3-4 upshift shaft speed axis values in order to get 3rd to 4th gear lockup to work how I want (both T/H and D) but it doesn't seem to make any difference. OS 11352409.

Yes, it seems that the ECM still has stuff inside we need to find and figure out

MQ105
January 2nd, 2012, 11:09 AM
I'm having the same problem with 3rd gear unlock in T/H mode.

GMPX
January 2nd, 2012, 11:46 AM
Don't panic yet, there is a lot more trans tables in the ECM, we are only just breaking the surface on what is there.

2007 5.9
January 2nd, 2012, 12:09 PM
There is always more guys...take it easy...Ross will get it to us when it's ready!!!