PDA

View Full Version : RR & Flex Fuel Question



driver456
December 31st, 2011, 03:53 AM
I have repinned a 99-02 pcm 0411 And have a COS#5 to work in my 97 C5.And is a Roadrunner pcm. Is there a way to flash in a flex fuel OS and still change it to a COS#5,And I do have the flex fuel sensor..I'm sure this was asked before.........Paul

GMPX
December 31st, 2011, 11:07 AM
Flex Fuel was only on one specific OS (12216125) for the 512K PCM. There was never any COS's written for that OS.

driver456
December 31st, 2011, 12:07 PM
Will there be? Hint hint:grin:

GMPX
December 31st, 2011, 12:09 PM
No, sorry, never will be.

driver456
December 31st, 2011, 12:19 PM
Ok.

mr.prick
December 31st, 2011, 12:34 PM
I asked a similar question in regards to a flexfuel COS.

It maybe possible just to use that OS with the Fuel Composition Sensor (pn 12570260). :nixweiss:

driver456
January 1st, 2012, 03:30 AM
I have the sensor & Ethanol Content Analyzer from Zeitronix hooked up for awhile now,Works pretty good.Instead of changing the tune all the time I would let the sensor do it,But I guess not.There is a OS with a FF tune I'm going to put in my 99 silverado and I'm going to put the FF sensor in that.I'll report back on how it works out..........Paul

macca_779
January 1st, 2012, 10:49 AM
Flex Fuel was only on one specific OS (12216125) for the 512K PCM. There was never any COS's written for that OS.

Would this os work and be fully functional in au cars. Would love to incorporate the fuel sensor

GMPX
January 1st, 2012, 11:02 AM
No, it's specific to 5.3L trucks only.

gmperformancecentre
January 1st, 2012, 01:41 PM
Here's a a stock OS (12216125) if you you need one to have a look at

driver456
January 25th, 2012, 01:52 AM
Flex Fuel was only on one specific OS (12216125) for the 512K PCM. There was never any COS's written for that OS.

Will that OS work in a 0411 pcm?Just wondering because I changed the pcm in my 99 Silverado to a 0411pcm w/12212156 os.

joecar
January 25th, 2012, 07:02 AM
Hi Paul, 12216125 runs on a 0411.

driver456
January 25th, 2012, 10:51 AM
Cool,Thanks Joe.