View Full Version : Saving LTFT's with a data log...?
joecar
January 24th, 2006, 06:18 AM
Is there a way to save the LTFT's and trans adapt trims in a scan data log...?
Thanks,
Joe
:wave:
Dirk Diggler
January 24th, 2006, 07:13 AM
Is there a way to save the LTFT's and trans adapt trims in a scan data log...?
Thanks,
Joe
:wave:
Edit -----> Properties --> Logging ;)
joecar
February 9th, 2006, 08:53 PM
Edit -----> Properties --> Logging ;)
Okay, I got those checked.
At the end of logging, I stop the recording, I cancel the Save box that pops up, I press the LTFT button, and now what do I do...?
Thanks.
Tordne
February 9th, 2006, 09:16 PM
Okay, I got those checked.
At the end of logging, I stop the recording, I cancel the Save box that pops up, I press the LTFT button, and now what do I do...?
Thanks.
That sounds like it should be it. I find I have to disconnect from the vehicle before I can view the LS1/LS6 LTFT data. If I trry and view before disconnect I get an error.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.