Dpf/egr delete for an lmm

[TERYX08]

I have a 2008 lmm. I am currently running the edge juice with the attitude monitor. My buddy has a V2 and i am wanting to use it to strictly delete my dpf and possibly egr. I am going to continue using the edge for the performance side and efi live to delete my dpf. Which tables need to be changed in order to do this. From what I have read, it seems as simple as changing B2501 to No and B2502 to 0 and then setting the regin min engine temp to max.

[Dmaxink]

Just curious, why would you want to run the edge when you have the option of fully adjustable tunes/ much better tuning with efilive? Considering you will have to pay a vin license fee to flash it- why not just get a custom tune since your cable is already licensed to the truck?

[TERYX08]

Its a money issue right now. Im sure I will go back later and do a full tune, but as for now I just want to delete the dpf and egr.

[Dmaxink]

http://forum.efilive.com/showthread.php?6584-quot-The-quot-DPF-removal-write-up

[TERYX08]

Alright so just to be sure, all I need to change are the 2 tables and the regin temp?

[Dmaxink]

those 2 tables, temps, then the dtc(s)

[TERYX08]

Awesome. Do you know which DTC(s) need to be changed off hand.

[GoneNomad]

those 2 tables, temps, then the dtc(s)

I understand that the DTC controls are in "Engine Diagnostics" -> "DTC Enables"

Where are the temp settings?

Are you referring to C1901 through C1908 (which are time values) in "EGT Sensors"?

Are any changes required to C1909 (minimum RPM), and C1913 (minimum ECT)?