PDA

View Full Version : Where is the Brake Torque Management Button B9905 at??



mega2006
January 15th, 2012, 04:36 AM
I can't seem to find the B9905 tab/button now? It used to be located under "Engine Protection" parameters...bottom of the scroll down list. Now the last item is D2014 RPM limit "D" control. What am I not doing correct?

2007 5.9
January 15th, 2012, 05:53 AM
F1294...listed under Injection Quantity, under limiters in the parameters box

GMPX
January 15th, 2012, 10:00 AM
Yeah, the disable method was changed so it got a new number.

mega2006
October 28th, 2012, 07:31 AM
Why would you enable or disable this feature? My tuner has it enable, Doghouse Gift tune its disabled, stock is enabled. I read the defination already on the software.

anarchydiesel
October 28th, 2012, 12:06 PM
BTM off= ability to do burnouts and high psi boosted launches, BTM on = no burnouts and approx. 10 psi max boosted launches on a stock truck.

anarchydiesel
October 28th, 2012, 12:07 PM
Leaving the BTM on helps protect the trans.

Boost
December 4th, 2012, 01:32 PM
14223

DoghouseDiesel
December 5th, 2012, 12:38 AM
Why would you enable or disable this feature? My tuner has it enable, Doghouse Gift tune its disabled, stock is enabled. I read the defination already on the software.

Because that tune is a manual transmission file and it is disabled by default on the manual trucks.

slasorv
December 11th, 2012, 11:21 AM
Do most of you guys turn this off or on with guys that have built trans?