PDA

View Full Version : ALDL (GM OBD1) cable with 16 pin connector ,USB



wahenn2002
January 20th, 2012, 01:57 AM
Hi, I recently purchased an ALDL (GM OBD1) cable with 16 pin connector, USB http://www.aldlcable.com/sc/details.asp?item=aldlobd2u
I bought this for my 1995 Chevrolet Cavalier LS, 2.2 liter. I understand that although my 1995 Cavalier LS has a 16 pin OBD2 connector, the actual system for my car is OBD1. I puchased the cable as the "check engine" light has come on. My situation is even more difficult as I live in London UK and can not go to a local GM dealership as they don't work on U.S. spec cars. The problem I have run into after the puchase of this cable is that I can not find software to download which will read the car's data. I have Windows 7 which may be an issue with some of the software out there on the internet. I basicly have a cable which is useless to me now after paying to have it shipped from the US while also paying import charges. Any help would be very much appreciated. Thank you, David

Tordne
January 20th, 2012, 11:38 AM
Hi David,

The EFILive V4 OBDI/ALDL Scan Tool would likely work with your vehicle, but you would need to get the vehicle data and create a vehicle definition file for use with the V4 software. There is an evaluation edition of EFILive V4 available on our downloads page (http://www.efilive.com/index.php?option=com_content&view=article&id=48&Itemid=133).

Information on the older cars is very hard to find. If you can send your full VIN to suport@efilive.com I might be able to send you some data for you to create the vehicle definition. If we do have anything I can also send you the data for another vehicle for which there is a vehicle definition. That might allow you to see how the definitions are created.

wahenn2002
January 20th, 2012, 09:55 PM
Andrew,

Thank you for your reply. My VIN is: 1G1JF524XS7157067.

Kind regards,
David

Tordne
January 22nd, 2012, 05:10 PM
Email sent just a moment ago.