Problems after locking E40 ECU. Won't start

[Highlander]

After the locking procedure the ECU hanged and then i had to remove power from the batt.

Did a PCM lock and the car will not start...

Tried unlocking back and vat relink and everything and it will NOT start.

There is NO fuel pressure.

Any help? Ideas?

Fried this PCM?

I have full flashed everything back and removed the lock.

Thanks

[Highlander]

Getting code p1632

Tried disabling vats as other posts by gmpx but not go... car will crank but fuel pump will not activate...

[GMPX]

Sounds like a pretty strange thing that has happened there.
I have heard of the occasional E40 going off in to space at the end of a full flash, but pulling the battery lead always returns them to life.
Is it a manual? Maybe it needs a clutch learn as well for some reason after it had a little melt down?

[Highlander]

its an auto... i'm going to get another PCM.

I think it "fried". I can read and flash to it... but.. it will not command fuel pressure. I don't get why.

[Highlander]

Car CRANKS but will not raise fuel pressure now.

[doubledip]

Is it energizing the fuel pump relay at all. Fuel pump fuse ??

[Highlander]

Yes! Im digging more about this in an hour!