Problem pulling up PID list

[boostedyards86]

In the scanner program I can't seem to pull up any pid's and don't understand what I'm doing wrong. Keeps saying i have the default pid file open I open the file with all the pid's and there is nothing for cummins in my file. Did I miss a download somewhere?

[2006Cummins]

The only way that I have been able to do it is to be connected to the truck. You can then select which pid groups you want, and save them as your "cummins" group.

Mike

[boostedyards86]

i read your thread about you not getting pid's either. Seems we are having a slightly different problem. I cleared the PID's that come up automatically and I click say RPM and it says i can only select this by choosing PID groups from above... but there are no pid groups above.

[MQ105]

i read your thread about you not getting pid's either. Seems we are having a slightly different problem. I cleared the PID's that come up automatically and I click say RPM and it says i can only select this by choosing PID groups from above... but there are no pid groups above.

Does your scan tool screen look like this?

http://i151.photobucket.com/albums/s122/mq105/efi9.jpg

[boostedyards86]

no it does not. PID file just says default, and Predefined PID groups are empty. Do I need to put it to default metric and then the PID groups pop up?

[Blacky]

Have you selected a Cummins controller?
Use: File->Select Controller, then select either CMB or CMC
See the [Cummins] text in the screen shot above at the bottom of the window - you need to see that.

Regards
Paul

[ScarabEpic22]

Have you actually connected to your Cummins ECM yet? Click the the green button in the upper left corner, then select the appropriate Cummins ECM. This is a Cummins-only deal, EFILive will default to the normal setup used in all GM vehicles.

[boostedyards86]

yes i put the plug into to odII port, truck on, scanner open, then click green button to connect up and it asks if I'm using the Cummins CMB and I click yes, and then I'm at no man's land.

[Ira]

Had this problem with a customer last night and re-installing 7.5 fixed it.

Ira

[boostedyards86]

well thats an inconvenience but ok i suppose it wont hurt to try.