PDA

View Full Version : Main injection duration



AH64ID
February 5th, 2012, 08:09 AM
Why does the command duration go sky high at low load and high rpm? Is it part of the rpm limiter?

It just doesn't seem proportional, even thou flow decreases with a pressure decrease.

Dmaxink
February 5th, 2012, 08:58 AM
To obtain the referenced mm3 at less pressure it takes more duration.

dansdieselp
February 5th, 2012, 10:51 AM
The lower the pressure the less fuel going through injector. In order to obtain the commanded volume of fuel at lower pressures the duration must go up.

AH64ID
February 5th, 2012, 11:05 AM
Which makes sense, but it just seems disproportionate to the actual time it would be needed to inject.