Rich at idle OLSD??? Tune attached, any help?

[T&A Custom Rides]

Im trying to tune my trucks ve tables and maf in olsd but its running to rich!? Anyone want to look over my tune? Despite what the calibration says its a 4.8 03 silverado, 4l80, 236/236 .617/.607 lift 112lsa, headers, cai. Its idling at 12.0 afr.......
12649

[T&A Custom Rides]

Hello????? Any help????

[macca33]

Give it time mate - somebody will be able to take a look when they are able.

I'm not at home, so have no EFILive to help....sorry!

[slows10]

Looks like you are still running closed loop.

[5.7ute]

Im trying to tune my trucks ve tables and maf in olsd but its running to rich!? Anyone want to look over my tune? Despite what the calibration says its a 4.8 03 silverado, 4l80, 236/236 .617/.607 lift 112lsa, headers, cai. Its idling at 12.0 afr.......
12649

Stock injectors?
I dont have efilive on this pc either to look at your tune file, but if you have larger than stock injectors, you may need to load the cax file for B9021 minimum transient pulsewidth.

[T&A Custom Rides]

stock injectors. I guess i am in cl. I tried failing the maf. What am i missing guys? This is my first full tune. Im trying to follow the tutorials.

[5.7ute]

Do you have any logs you can post up?

[T&A Custom Rides]

No I don't. Won't hardly run.

[5.7ute]

Can you post up the stock tune file as well?
I will only be able to have a look tonight when I get home to see what you have done so far. But at a guess you will need to drop at least 20% from the idle areas in the VE table. A cam that size will need a reported wideband AFR of around 15.8:1 and at least 26 deg base spark IMO.
Also make sure you have bumped up the idle speed to around 1000rpm for starters & added 2G/sec to the desired airflow table.