PDA

View Full Version : Efan troubles.



Brent5631
February 20th, 2012, 12:27 PM
I installed 05+ efans in my 2003 sierra a few days ago. I have been unable to get them to turn on using the pcm. I used a grounded wire and triggered the relays and everything worked great. This is the first time i have tuned the fan tables but i followed other examples here. I was hoping someone could provide some insight or any other ideas why it is not working.
I am going to go double check that the pins are in the correct position now.
thanks

Brent5631
February 21st, 2012, 11:52 AM
Ok guys I cant figure this out. I cant control them even with the scanning software toggling them myself. This is pretty frustrating.

joecar
February 21st, 2012, 12:02 PM
Can you post a diagram of how you wired the fans.

Brent5631
February 21st, 2012, 12:38 PM
I wired it just like the 05+ fans. I got them working. Most of the problem was me being pretty dumb. I did have a wire loose on a relay but I was just used to my 99 where the fans cycled a lot more.Also my dash temp gauge reads higher than it should.
anyway im happy it works now.

joecar
February 21st, 2012, 12:57 PM
Ok cool :cheers: