PDA

View Full Version : Cant communicate with LBZ



01 silver bullet
March 16th, 2012, 01:20 PM
Im trying to copy the stock calibration and it wont do it.
First it says EFIlive cannot communicate with flashscan, click ok, then says connection to ecm lost, BUT, unplug it, turn around plug it into my wifes LBZ and it works fine..
ALSO when I plug the V2 into this one it just comes on, one orange light and the EFI Logo on the screen, Plug it in my wifes and it shows the logo, then the menu, this truck Has a remote start, So does ours but different model, so.... I believe the problem is in the truck, does anyone have any insight on this? im stumped... going to start looking over the truck, cant find a single blown fuse, I also tried pulling the radio and info fuse cause PPE says to do that if you get no communication message on there excelerator...

Thanks in advance guys and gals!

01 silver bullet
March 16th, 2012, 01:22 PM
18:21:38.680: Scanning for EFILive FlashScan V2 HAPI
18:21:38.696: Autodetect interface ...
18:21:38.976: Interface firmware version: 2.7.22
18:21:38.976: Connection to [FSV2] interface is OK
18:21:39.210: USB driver version: 4.0.0
18:21:39.210: USB library version: 3.1.18
18:21:39.242: Interface firmware model: FSV2
18:21:39.257: Interface firmware model: FSV2
18:21:39.288: Interface firmware version: 2.7.22
18:21:39.304: Interface firmware date: Aug 23, 2011
18:21:39.320: FlashScan serial number: 003816158639
18:21:39.351: FlashScan license number: 003816158639
18:21:39.382: Disconnecting ...
18:21:41.644: Autodetect interface ...
18:21:43.095: Interface not detected
18:21:43.095: Disconnected
18:21:43.781: Scanning for EFILive FlashScan V2 USB
18:21:43.797: Autodetect interface ...
18:21:45.653: Interface not detected
18:21:46.340: Scanning for EFILive FlashScan V2 HAPI
18:21:46.355: Autodetect interface ...
18:21:47.806: Interface not detected

joecar
March 16th, 2012, 01:51 PM
Hi,

Have you tried the latest version: Release-Candidate-10-Mar-11-2012 (http://forum.efilive.com/showthread.php?18702-Release-Candidate-10-Mar-11-2012)

RC10 includes newer firmware, update your V2 firmware to 2.7.24 and try again.

01 silver bullet
March 19th, 2012, 03:37 AM
Haven't tried the update but it works on all the other trucks?