Can BBL log E38 and T43 at same time?

[zbadestz]

Can you log both on lap top or just on V2?

Any speccial trick?

Thanks

[Taz]

Can you log both on lap top or just on V2? ...

BBL (V2) only.


... Any special trick? ...

PIDs cannot have the same name (e.g. VSS) - cannot log ECM VSS and TCM VSS at the same time. I believe once V8 is fully rolled out, the PIDs will be renamed / realigned such that this restriction will be lifted.


Regards,
Taz

[zbadestz]

Thank you

[Dieselman]

Also if you look through your PID list on the BBx setup there is a lot of stuff you can log via the TCM instead of filling up your ECM list. I am logging coolant, intake temps and RPM just to name a few :D


12995

[zbadestz]

Also if you look through your PID list on the BBx setup there is a lot of stuff you can log via the TCM instead of filling up your ECM list. I am logging coolant, intake temps and RPM just to name a few :D


12995


Can I get a screen shot of the rest of your pids?

Also do you have any maps you can share for reading data logs

[Dieselman]

Can I get a screen shot of the rest of your pids?

Also do you have any maps you can share for reading data logs


Here is a copy of my PID lists 13027

Save that to EFILive/V8/tmp and you should be able to open it up in the BBX tab :)


Cheers

Ben

[zbadestz]

How come on my data log the gear change doesnt match where my rpm changes?
Does recording to many pids slow it down?

Also my MPH on my time slip says 139mph but on my data it shows like 129mph