Error $0109

[gippy]

*Error $0109
I recently updated my Autocal and now i get an error message, i can't even connect to EFIlive Explorer any more. The screen on the autocal is flashing. It shows i have the most recent updates but still got nothing.

[ScarabEpic22]

You need to program the latest firmware using the EFILive Control Panel. With the AC plugged in, open V8 S&T, then click the little FlashScan icon near the windows clock. Once that opens (should be EFILive Control Panel), then click F6 Firmware, then Update BootBlock. Once that is done, click Update Firmware. Should be all set.

[gippy]

Thank you this Wok't a treat. Thank help for you help :):)):):)

[ScarabEpic22]

Glad you're up and running!

[autronika]

Hi,

I have same problem, after update my autocal screen flashing....... but i have last version and not possible reflashing again, in attach print screen.

Thanks !

13240

[joecar]

Did you program the BBx config files...?

[autronika]

Hi,

I explain in detail.....

My client was updating the firmware (Scan&Tune V8.2.1 Build 197), as I was finishing to program fails.

After that, Autocal flashing screen and firmware appears OK.

You can tell me step by step how to fix or re-flash the firmware?

Thanks for your time

[joecar]

See the picture you posted in post #5 above... click BBx, then click Tuning, then create/modify the ECM list to include your ECM, delete others that you don't want, click Save, Click Program All (found by clicking down arrow next to Program button).

[gippy]

i have a new error has ane one come acros this one? so im trying to conect to the pcm in scen tool so i tyed 2 difent cars with the same resolt it will let me flash the pcm but not use the dashbord / darta log . any healp would be much appreciated

Error report generated by EFILive at 11:14:10 on Sep 09, 2012

Error code: ERR_RESPONSE/5
Response $0D: .

EFILive Version: 7.5.7 (Build 211)

Platform: Windows XP
Version: 5.1 (build 2600)
Processor type: Pentium 2295MHz

Directories
Temporary Cache: C:\Users\gippsta\Documents\EFILive\V7.5\Temporary cache
Logged Data: C:\Users\gippsta\Documents\EFILive\V7.5\Logged data
Customers: C:\Users\gippsta\Documents\EFILive\V7.5\Customers
Configuration: C:\Program Files (x86)\EFILive\V7.5\Configuration
Exported Data: C:\Users\gippsta\Documents\EFILive\V7.5\Exported data
Images: C:\Users\gippsta\Documents\EFILive\V7.5\Images
Sounds: C:\Users\gippsta\Documents\EFILive\V7.5\Sounds
Maps: C:\Users\gippsta\Documents\EFILive\V7.5\Maps
Pids: C:\Users\gippsta\Documents\EFILive\V7.5\PIDs
Virtual Dash: C:\Users\gippsta\Documents\EFILive\V7.5\VDash
Print Reports: C:\Users\gippsta\Documents\EFILive\V7.5\Print reports
Bug Reports: C:\Users\gippsta\Documents\EFILive\V7.5\Bug reports

[joecar]

Did you select the correct PCM/ECM (File->Select Controller)...?

[gippy]

hi yer it a 2005 vz ss and i seelected ls1 98/08pcm . i have i have now got it to work intermittent

[Blacky]

i have a new error has ane one come acros this one? so im trying to conect to the pcm in scen tool so i tyed 2 difent cars with the same resolt it will let me flash the pcm but not use the dashbord / darta log . any healp would be much appreciated

When you get that error message, there is an option to save it. Please save it as a file and attach the file to the next post, or email it to me at [email protected]

Regards
Paul

[gippy]

hi m8 yer i did select the correct pcm/ecm
im realy stuk on this the problem started arfter i did a auto update

[joecar]

Try doing a manual install (download/install the files).

[gippy]

Do you mean to do a re install of Efi live

[joecar]

Yes, of V7 and V8, do not do auto update.

[Blacky]

Been investigating this issue, turns out it may be a fault in the V7 Scan Tool software. I'm working on a fix for it now.

The problem occurs when the orange A/D inputs send data back "out of range" values to the V7 scan tool software.
Try logging without anything connected to the orange A/D inputs.

If you do have something connected and your A/D inputs are not correctly calibrated, then it could cause the values to be out of range.
Is it possible that your A/D inputs are not correctly calibrated?

Regards
Paul

[Blacky]

If that doesn't help, you can try logging in stream-slow mode (until a fix is released).