PDA

View Full Version : Checksum Issue



frcfed347
April 30th, 2012, 09:47 AM
Hey Guys,

I recently read out an ECM, and it is giving me a Checksum error. Is there anyway this can be fixed other than reflashed the ECM to a stock file and starting over? It will save me a lot of time. I can post a screen shot if that helps as well. Thanks again for the help.

GMPX
April 30th, 2012, 10:29 AM
Is there a history with the ECM? Has it been tuned before?, What is it out of?
EFILive could fix the checksum and flash it, but it might brick the ECM, hence the warning.